Thank you so much for joining us at the In-Site Tour! Sharing a recap of the valuable information we shared.
Carlisle Warranty and Customer Success Portal Training - Contact Susan Deaton: sdeaton@csl-materials.com
2024 Customer Reference Guide is a great tool, save to your smartphone, tablet, or device for quick browsing!
Assembly Letter Requests Please send to Austin Krusec – akrusec@csl-materials.com and Cassie Chavez – cchavez@csl-materials.com
Mastics and Cements:
Considered a permanent fix when combined with Henry’s Yellow Fiberglass Mesh Fabric. No need to come back and coat later.
100% underwater adhesion
Temperature Range: -20°F to 140°F.
100% underwater adhesion
Temperature Range: 0°F-120°F
Great option to stop emergency leaks.
Caulking tube pack size for convenient carrying onto the roof
Use on BUR roofs or single ply for emergency leaks, just be sure to cut out and do a traditional single ply repair if you need to stop a leak immediately and you plan on going back later to your standard repair.
PG-163 must be coated within 30 days if installing on a BUR roof
Pro Grade 923 Butter Grade Roof Sealer
Used for flashing penetrations, metals seams, fasteners, and drains.
Brush or Trowel Grade
Can be applied a ¼” thick on vertical applications.
Great repair product on other manufacture’s silicone or acrylic roofs. Also a great option for direct to metal repairs.
Pro Grade 928 Pitch Pocket and Self Leveling Roof Sealer
Self-leveling over standing seam metal fasteners. Completely encapsulates the fastener without having to use a brush.
Encapsulates 100-150 fasteners at ½” diameter per 10.1oz Caulking Tube
Rain safe within 1 hour after installation
Pro Grade 957 Silicone Fibered Roof Sealer
Reinforced with Fibers
Seals flashings, fasteners, seams, penetrations, drains and repairs
Trowel Grade
Excellent Repair material for many roof substrates
Pro Grade 988 Silicone Roof Coating
Patented Dirt Pick Up Resistant Technology. Roof stays whiter longer
Rain safe in 15 minutes
Wide Install Temperature Range: 35°F – 120°F
92% Solids
Standard Colors Available: White, Gray and Tan
EPDM
Warranty Updates with 60mil EPDM
Ballast:
30yr with 60mil. Need proof RUSS was installed at the angle change along with primer. Photos highly recommended or FSR will have to cut into the angle change to confirm.
Warranty Fee: $.17/sq.ft. for a 30yr
Adhered:
3” tape and a single 6” T-Joint is all that is required for seams and intersections
A single layer of 6” Cover Strip or Overlayment Strip is all that is needed for stripping in metal
90mil Sure White EPDM
40yr Material Only Warranty now available
Material Only Link: https://www.carlislesyntec.com/Tools/Warranty-Forms/Membrane-Material-Warranty
NEW GRAY EPDM
Available in 60-mil NR 10’x100’s and accessories
Available in Q2, 2024
Sure-White EPDM:
16 SKU’s available, including White Reinforced EPDM
NEW SAT EPDM:
All Black SAT EPDM bottom-end installation temperature is 20 degrees.
All White SAT EPDM bottom-end installation temperature is 32 degrees due to the different expansion/contraction rate of white membrane vs black.
NEW 5’x40’ SAT Black EPDM Rolls
Great for smaller roofs or high rise buildings where loading with a crane can be difficult
Weighs 80lbs
Great option for repairs, especially on walls
New Approved Ambient Temperature of 20° for all SAT EPDM Membranes
Must let the membrane relax for 30 minutes once unrolled to allow the adhesive to acclimate to the temperatures
Available in Q2
TPO
16’ Wide TPO
16’ Rolls now available in White, Gray and Tan
No upcharge
35% less seams to weld compared to a 10’ wide TPO Shee
Weight is 528lbs
For Fully Adhered and RhinoBond Systems Only
SAT TPO
New Ambient Temperature of 25° and rising (Coming April 2024)
Available in White, Gray and Tan
60mil (20 yr NDL) and 80mil (30 yr NDL) thicknesses available
NEW 12’x100’ SAT TPO in White, Gray and Tan coming April 2024
NEW SeamShield on TPO
Release liner on the welding edge of the seam so installers do not have to clean the seam before welding.
Protects the seam from adhesives, primers and dirt
Consistent welds due to a factory cleaned seam
Available to place orders 4/1 and start shipping 5/1 in 10’x100’ and 12’x100’ in White, Gray and Tan
ISO/Coverboards
SecurShield HD w/ ReadyFlash Technology
Allows the installer to manipulate flash off times depending on the temperature
Black side up on cold days to speed up flash off times
White side up on hot days to slow down flash off times
Comes standard and no upcharge
Extended Taper Panels
Reduces Labor and Handling Reduces “Fill” Panels
Reduces Applications of Adhesives or Hot Asphalt
InsulBase Tapered Polyiso
SecurShield Tapered Polyiso
D, E, F, FF, Z, ZZ and QQ are the extended panels
Available in Pre-cut Hips and Valleys – reduce waste
Hinged Target Sump® – Hinged 8' x 8' Sump, pre-assembled in one piece
Fewer squares of applied material
Less adhesives required
All boards are standard – Custom orders not available
SecurShield HD Composite
6 plates and fasteners to achieve a FM 1-90.
SecurShield HD requires 12, 1/2" gyp 8, and HD Composite only 6
Uses less adhesive when insulation layers are being adhered, just like extended tapered panels
Less boards to move since the HD board is laminated to the iso from Carlisle
Upcharge for HD Composite is 10 cents so a wash when fastening HD separately over iso due to less fasteners
SecurShield HD Composite RL
RapidLock Benefits:
No temperature restrictions
No VOCs or odors
Adhesive-free system
Time and labor savings
HD Composite Benefits:
Improved resistance to hail and punctures
Improved wind uplift – reduced fastener requirements
Brings a 4' x 4' option to RL line
Securock UltraLight Products
Glass Mat (Gray Facer): Direct Equivalent to DensDeck
Mechanically fastened or RhinoBond Systems Only
Available Thicknesses: ¼”, ½” and 5/8”
½” and 5/8” are 9.4lbs lighter per 4’x8’ board than their DensDeck equivalent
Same compressive strength so score and snap just like DensDeck
Coated Glass Mat (Yellow Facer): Direct Equivalent to DensDeck Prime
Fully Adhered, Mechanically fastened or RhinoBond Systems
Available Thicknesses: ¼”, ½” and 5/8”
½” and 5/8” are 9.4lbs lighter per 4’x8’ board than their DensDeck equivalent
Same compressive strength so score and snap just like DensDeck
Carlisle has partnered with Nationwide Foam Recycling
Roof must be an existing Carlisle Roof
$.04/sq.ft. rebate
Qualified Material/Assemblies: Mechanically fastened or ballasted EPDM, TPO, PVC. No fully adhered due to adhesives on the membrane and iso
Phone Number: (888) 820-2760
How it Works:
Contractor is responsible for bundling up the material you wish to have recycled
Contact Nationwide Foam and request a pick up
Nationwide Foam then reaches out to potential buyers and once they get one, they will schedule the pick up.
Contractor is responsible for freight and varies depending on the location of the buyer
Once material has been delivered, Nationwide Foam sends you a check
The goal of this rebate program from Nationwide Foam is to provide a rebate that offsets the cost of labor and freight.
Any leftover money can go towards your bottom-line
FleeceBack
Achieve a Class A directly over a combustible deck
If insulation is installed under the roof deck, this is a great option to provide the customer, and you don’t need a coverboard.
Maximum slope of ½”
2” Hail coverage available with approved lap detail
Splatter
Can be used to install iso, coverboard and insulation with an approved Spray Rig.
Dual Tanks can only offer splatter for membrane attachment. Insulation and coverboards need to be installed with beads when using the Dual Tanks.
Improved Aesthetics
Faster install
Covering 1000sq.ft. with splatter takes approximately 14mins
Covering 1000sq.ft. with beads takes approximately 19mins
15 Gallon Coverage Comparison
4” o.c. beads: 2,110sq.ft. – 2,700sq.ft
6” o.c. beads: 3,000 - 3,750sq.ft
Splatter: 5400 - 6000sq.ft.
Spray Booth and Rig Training:
Industry’s only controlled climate booth, world class learning environment.
Can replicate all temperatures Colorado experiences
Can go from 20° to 100+° in approximately 30mins
2024, 2 Day Training Classes Available:
5/14 – 5/15
7/30 – 7/31
9/24 – 9/25
1/19 – 11/20
Day 1 involves a complete overview of the spray rig you use
Day 2 is spray training in the temperature controlled booth so you can learn how your machine operates during certain temperatures
VacuSeal & RapidLock Price Reductions for 2024
Please inquire with CSL West for more info
New Specialty Pavers
Porcelain Pavers = Hanover Architectural Products
Gridloc System = Hanover Architectural Products
Wood Pavers = Bison Innovative Products
Synthetic Turf System = Green Roof Outfitters (GRO)
Detec – TrueGround Conductive Primer
Started stocking and selling in February 2021
Least intrusive ELD System available
Can test on seams, vertical walls, and black EPDM
Install on top of the substrate that the membrane will be attached to. No need to bury within the system
Geocel Phantom Sealant
Allows each color to transform and match the color it's being applied to
No need to have multiple colors. One color can match many
Provides excellent adhesion to coated metal substrates and adjacent substrates
Applies in adverse weather: damp, cold or hot
MetShield
Direct equivalent to WIP 300